design method的例句大全

On Several Numerical Problems in the Numerical Method of Shape Optimum Design for Elastic Continuum

弹性连续体形状优化设计数值方法的几个数值问题

This paper discusses the index curve as contour in the application of pressure regulating valves, introduces the details of the design method, and analyzes characteristics of pressure regulation under different Mach number.

本文论述了半截式指数型面曲线在环状缝隙式调压阀上的应用，介绍了详细的设计计算方法，分析了在不同马赫数下的调压特性。

The designing and calculating method of contour plate taking into consideration the profile finger's arc radius and diamond pen point's arc radius is introduced, and the design result is proven with some production examples.

文章介绍了考虑仿形指尖圆弧半径和金刚笔尖圆弧半径的仿形样板设计计算方法，并用生产实例验证了设计结果。

An Improved Method to Design the State Feedback Controller

一种设计状态反馈控制器的改进方法

A design method of mechanical high temperature pressure controller is introduced.

介绍了机械式高温压力控制器的设计方法；

The Design Method of Using PLD to Displace the BCD binary Code Converter

用可编程逻辑器件取代BCD二进制转换器的设计方法

At present, the usual design method of pipe conveyor is the same as that of traditional trough belt conveyor in many ways. The different aspect is that the value of running resistance coefficient is larger than that of traditional belt conveyor.

目前，圆管带式输送机各种阻力的计算采用与通用带式输送机的设计计算相同的方法，不同的是主要阻力计算中的运行阻力系数的数值大于通用带式输送机的系数。

Computer Design Method for Series Corrective Network of Feedback, Systems

反馈系统校正网络的计算机设计方法

A computer-implemented optimizing design method of the corrective network parameter in control systems is introduced in this paper. Its algorithm is simple, convergent and can be easily used in engineering applications.

本文介绍一种由计算机实现的控制系统校正网络参数最优化的设计方法，算法简单、收敛、便于工程应用。

According to the change of the corrective network after a missile remodeling, the author analyzed the reason of this change, introduced the compensation principle of the band-block network and gave the design method of these active networks.

根据某导弹改型前后校正网络传递函数的变化，分析了网络变化的原因，介绍了陷波器消除结构谐振的补偿原理，并给出了此类有源陷波器的设计方法。

By Way of inlaying conducting plates in the port plate the authors succeed in measuring the oil film thickness in the distributor pair and verify the correctness of the balance factor method. Meanwhile, a new e new experimental approach is for-mulated for the design of distributor pair.

通过在配油盘上埋设电容极板，作者成功地测出了配油付的油膜厚度，并验证了压紧系数法的正确性，为配油付的设计提供了一种新的实验方法。

These show that the technology of primary mirror, the fabricate on and test of the second mirror, the design of the fused quartz field corrector, the select of the fused quartz material and its fabricating method, the alignment of the optical system are successful.

说明主镜的加工工艺是成功的，同时也说明凸双曲面副镜的加工、检验[2]，熔石英像场改正镜的设计[1]、选料、加工[3]及光学系统的调整[4]也是成功的。

A linearization method to design biorthogonal cosine modulation ( BCM) filter banks is proposed.

介绍了一种用于设计双正交余弦调制滤波器组的线性化方法。

Based on function analysis, an improvement method is put forward for bearing shell construction design. An integral machining is realized technologically.

通过分析轴承壳体的功能和作用，对轴承壳体的结构设计提出了改进方法，并从工艺上实现了轴承壳体的一体化加工。

And it's also researched that the method of design and checking calculation.

并研究了体外预应力加固结构的设计和验算方法。

This paper introduces the the design checking, process, construction methods and quality control of capping beam and embraces hoop method.

文章介绍了抱箍法盖梁施工的设计验算、工艺流程、施工方法及质量控制。

Due to the complexity of the behavior of pile capping beam widely used in the construction, the inverted continuous beam method is usually adopted in design methods to simplify the computation.

条形桩基承台梁在我国现代建筑工程中应用极为普遍，其设计计算大多采用倒置的连续梁模式进行简化计算。

Study on design method of engineer for current loop with counter electromotive force action

反电动势作用时电流闭环的工程设计方法研究

Yield Prediction Method and Its Application in Seismic Design of Building Structure

建筑抗震设计的屈服判别法及其工程应用

Process design of seamless pipe hot upsetting-extruding method for making flange Adaptive EFG-FE Coupling Analysis of Upset Extrusion

采用无缝钢管镦挤法兰突缘的工艺设计镦挤过程自适应耦合无网格-有限元法分析